Chainsaw Level 1 Ticket

FWPCOT2254 – Maintain chainsaws
FWPCOT2273 – Trim and cut felled trees

Book a course

Facility

Cost

Duration

Choose a date

Facility

NORTH BRISBANE - Neilson Road, Kurwongbah, QLD 4503

Cost

$550 p/p

Duration

1 day

Choose a date

Jun 12 Fri

Facility

SPREYTON - 14 Loone Lane, Spreyton TAS 7310

Cost

$550 p/p

Duration

1 day

Choose a date

May 4 Mon
🔥2 spots left

To book into a course today with our Melbourne office, call our Melbourne Team on (07) 5491 2144*
*Course dates, locations, and prices subject to change – call us for the most up-to-date course information.

Course details

This chainsaw training course covers two nationally recognised units of competency: FWPCOT2254 – Maintain chainsaws and FWPCOT2273 – Trim and cut felled trees.

The course provides the knowledge and skill required to safely operate and maintain chainsaws, including servicing, sharpening, cleaning, storage and fuel management. It also covers how to safely trim and cut already felled trees using correct techniques and safety procedures.

Training includes both theoretical and practical training components. Participants are assessed on their theoretical understanding and practical competence across both units. General workplace legislative and regulatory requirements apply to this training, and additional licensing or certification requirements may apply in some states and territories.

Course name

Chainsaw Level 1

Duration

1 day face to face

Cost

$550 per person

Course code

FWPCOT2254 - Maintain chainsaws
FWPCOT2273 - Trim and cut felled trees

On-site & Group bookings

Available on request

More courses, More often

In all our locations!

Target audience

Chainsaw Level 1 training applies to personnel who are currently working or seeking work in arboriculture, forestry, agriculture, horticulture, or primary or civil industries.

Course delivery

This chainsaw course develops the essential skills and knowledge required for safe chainsaw operation in line with industry and legislative requirements.

Upon successful completion, participants will be able to:

Safely operate a hand held chainsaw when trimming and cutting felled trees, including correct start-up, handling, positioning and control techniques
Plan and assess cutting tasks by identifying site hazards, ground conditions, environmental considerations and timber stresses such as tension and compression
Apply recognised cutting methods including bridging, boring, wedge, ripping, swinging and step cuts while maintaining control of cut sections
Carry out routine and periodic maintenance in accordance with manufacturer instructions, including chain sharpening, component checks, cleaning, lubrication and fuel management
Identify and manage common risks such as kickback, pinched bars, fire hazards and mechanical faults
Select and correctly use PPE, follow workplace health and safety procedures, and complete required communication and reporting processes for site activities and equipment maintenance

Training areas

Face-to-face training and assessment can be conducted at one of Link Resources’ purpose-built training facilities or on-site.

Link Resources Training Facilities:

What our students say

Greg delivered the 4WD skill set training with enthusiasm and a great focus on safety.

He was patient with people who may not have had much exposure to off road driving and was informative with his training approach, providing real world experiences to explain course content, and ensured all attendees understood the material and procedures prior to moving on. The course was useful and delivered well. Thank you to the team and Greg

Without a doubt one of the best 3 day training courses I have attended.

Steve trained me in 4WD offroad driving. The full on day was more than enjoyable. I was able to overcome my fears of driving in rough terrain. Russell was fantastic with providing theory and practical on many compulsory requirements to enter a mine site.

Steve was a fantastic trainer.

Steve was a fantastic trainer with real world experience and the perfect way to relate knowledge and experience in a high risk licence training course!

Everything you needed at your finger tips.

Great couple of days at Cannon Hill facility. Russell done a terrific job as the trainer, with plenty of experiences he could share. Thank you guys and well done.

Great training, and very knowledgeable.

Straun Cameron delivered great training, he was very knowledgeable of industry standards and procedures and had good advice in how to approach different scenarios.

I now have the skills for my workplace.

Straun and Stephen did a great job conducting my HSR course. I felt like I learnt a lot and now have the skills as a competent HSR for my workplace.

Excellent trainers with extensive experience.

I attended Link Resources in Brisbane branch for 4wd training and Standard 11. The trainers were excellent with extensive experience in the resources sector. Good mix of theory and practical. Thank you to Boxie, Phil and Angela at Link Resources.

Entry requirements

All candidates must be literate in the English Language (no interpreters allowed).

Due to the physical performance requirements of the course, all students are required to have the physical capability of operating a 5-7kg chainsaw.

At enquiry, students can enter the program by expressing an interest and being sent an information pack that contains a booking notification and course information (Course Brochure). This interest process enables the RTO and client to work together to ensure the course is suitable for them and to identify any additional support needs & make adequate provisions

No prerequisites exist for this course.

Payment Options

Please see the Link Resources Payments, Cancellations and Refund Policy below in Student Information for all details on Payments for your course.

Payment can be made via direct bank transfer, eftpos, cash or cheque. For billing information, including who to write a cheque to, please email accounts@link-resources.com.au or call (07) 5491 2144.

Pathways

Training & Education Pathways

For those currently using, or looking to progress into, chainsaw work involving more complex tree felling tasks, the next step is:

FWPCOT3347 – Fell trees manually (intermediate)

This unit builds on the foundations established in Chainsaw Level 1 and is suited to operators who are ready to move beyond trimming and processing already felled timber. It covers planning and carrying out manual tree felling in more challenging conditions, including assessing lean, defects, site constraints and environmental factors.

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Link Resources Training Pty Ltd (RTO 45483).

Employment Pathways

These units support employment opportunities across arboriculture, forestry, agriculture, civil construction, utilities and maintenance sectors.

Chainsaw Level 1 training is suited to workers involved in vegetation management, land clearing, fencing, rural operations and general site-based roles where chainsaw use forms part of daily tasks.

If you are unsure which chainsaw or forestry units suit your current role or the type of work you plan to move into, our team can help you map out the right training pathway.

Contact us

Why choose Link Resources for your chainsaw training?

Highly experienced trainers

Learn from qualified trainers with extensive industry experience operating chainsaws across a range of worksites, including forestry, civil and rural environments

A clipboard with three checkboxes and a pencil.

Frequent courses and flexible options

We run regular public courses each week, making it easy to secure a training date that suits you. We also offer private group bookings conducted on site where suitable facilities and equipment are available.

Purpose-built facilities and custom solutions

Our established training locations are designed to reflect real workplace environments. For organisations, we can tailor training delivery to align with site requirements and operational needs.

Wide range of nationally recognised units

We deliver a broad range of nationally recognised units across heavy industry, resources, civil and safety sectors, allowing you to build further competencies as your role progresses.

Need something different? Call us on 07 5491 2544

Our locations

Link Resources has purpose-built training facilities all across Australia to meet your specific training requirements.

Brisbane

18/229 Junction Road, Cannon Hill QLD 4170

Sunshine Coast

8 Technology Drive, Warana, QLD 4575

Kurwongbah

Neilson Road, Kurwongbah QLD 4503

Melbourne

24/94 Keys Rd, Cheltenham, VIC 3192

Adelaide

Unit 4/77-79 Tapleys Hill Rd, Hendon SA 5014

Devonport

14 Loone Ln, Spreyton TAS 7310

Launceston

55 Oakden Road, Prospect TAS 7250

Frequently Asked Questions

Do I need a chainsaw licence in Australia?

There is no single national “chainsaw licence”. However, under Work Health and Safety (WHS) laws, employers must ensure that anyone operating a chainsaw is properly trained, instructed and supervised. Completing nationally recognised units such as FWPCOT2254 and FWPCOT2273 provides formal evidence of competency.

Is Chainsaw Level 1 enough for all types of tree felling?

No. Chainsaw Level 1 covers maintaining a chainsaw and trimming and cutting already felled trees. If your role involves manually felling standing trees, particularly in more complex environments, you may require further training such as FWPCOT3347 – Fell trees manually (intermediate).

Can I use this qualification across different states?

Yes. The Statement of Attainment is nationally recognised under the Australian Qualifications Framework. However, some worksites or states may have additional site-based or industry requirements, so it is always worth confirming with your employer.

Do I need to bring my own chainsaw or PPE?

Training equipment and required PPE are provided during public courses. For on-site or group bookings, requirements may vary depending on the training arrangement. Our team will confirm what is needed prior to your course date.

This course and all related training and assessment services are delivered by Link Resources Training Pty Ltd (RTO Provider Number 45483).

Level up with the experts in industry training

Link Resources is the team helping you fill the gap in your qualifications or services.

Chainsaw Level 1 Ticket

Book a course

Course details

Target audience

Course delivery